| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE 2 SCREWS HOLDING THE HANDLE COVER IN PLACE.
| Screwdriver-flat tip |
|
|
| 2 |
|
LIFT THE HANDLE COVER FROM MACHINE. LOCATE THE COMMUNICATION CABLE(WHITE COMPUTER CABLE). CHECK THE COMMUNICATION CABLE AT THE CONTROL PANEL. CHECK TO MAKE SURE THE CABLE IS PLUGGED IN TIGHT. VISUALLY INSPECT THE CABLE FOR DAMAGE SUCH AS, CUTS OR CRACKS.
|
| 3 |
|
REMOVE THE 3 SCREWS HOLDING THE CONTROL BOARD TO THE MACHINE.
| Wrench-Allen metric 5.0mm |
|
|
| 4 |
|
PULL THE POWER BOARD DOWN TO EXPOSE THE WIRING.
|
| 5 |
|
CHECK THE COMMUNICATION CABLE AT THE POWER BOARD. CHECK TO MAKE SURE THE CABLE IS PLUGGED IN TIGHT. VISUALLY INSPECT THE CABLE FOR DAMAGE SUCH AS, CUTS OR CRACKS.
|